sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 2016.1 4 push-on bayonet lock miniature waterproof connectors hr34b series features 1. water and dust protection ? ip67 or more (ip68) water and dust protection rating when fully mated. ? resistant to industrial grade oils. ? 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. easy and precise mating ? mating: just inserting plug unit completes mating unmating: rotating sleeve counterclockwise unlocks connectors (fig.1) ? marking helps align plug with receptacle when mating. ? 3 guide keys make blind mating possible. (receptacle structure prevents plug from damaging receptacle terminals) 3. multi-directional cable exit right angle plugs allow the cable to exit in 8 directions, in 45? increments.(fig.2) 4. safty standards the 4-position connectors meet requirements of t uv standard. 5. wide variation item number of positions connector type terminations(plug) terminations(receptacle) conduit material applicable cable size(reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (?5.7~6.5), (?6.5~7.3), (?8.0~9.0) push-on bayonet lock fig.1 mating : just inserting plug unit will complete mating un-mating : rotating sleeve to unlock mating cable exit directions fig.2 product specifications 1a dc 500v dc 10 pos. : 900v ac / 1 minute 4 pos. : 2,000v ac / 1 minute 20m? max. 1,000m? min. no flashover or insulation breakdown 1. contact resistance 2. insulation resistance 3.withstanding voltage specification item conditions insulation resistance : 50m? min. (at high humidity) insulation resistance : 500m? min. (when dry) no water penetration inside connector at the depth of 1meters for 0.5 hours. 500 cycles no electrical discontinuity of 10s or longer contact resistance : 30m? max. insulation resistance : 500m? min. frequency : 10 to 500 hz/cycle, total amplitude of 0.75 mm, 98m/s 2 each, 3 hours in 3 axis. temperature : -55c / +15 to +35c / +85c / +15 to +35c time : - 30 min. / 2 to 3 min. / 30 min. / 2 to 3 min. 5 cycles 336 hours at 71c, and humidity of 95% acceleration of 490 m/s 2 , 11 ms duration, 3 axis, each for 3 hours no electrical discontinuity of 10s or longer 4.vibration 5.shock 6.durability (mating / un-mating) 7.temperature cycle 8.humidity 9. water protection current rating voltage rating ratings 10 pos. : 200v ac, 250v dc 4 pos. : 200v ac, 200v dc (pollution degree 3) 400v ac, 400v dc (pollution degree 2) 10 pos. : 3a 4 pos. : 5a operating temperature range storage temperature range -25c to 125c -10c to 60c materials / finish remarks --------------- --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell insulator o-ring male contacts ground contact 10 pos. 4 pos. 4 pos. zinc alloy pps copper alloy brass brass fluororubber gold plated silver plated silver plated black chromate finish ( trivalent chromium ) color : black --------------- receptacles remarks --------------- --------------- --------------- --------------- ul94v-0 part material finish outer shell o-ring gasket insulator female contacts 10 pos. 4 pos. zinc alloy, aluminum alloy, and polyamide resin (black) fluororubber, nitrile hydride rubber pps black chrome plating, black chromate finish (trivalent chromium) color : black --------------- phosphor bronze copper alloy gold plated silver plated plugs hr34b series push-on bayonet lock miniature waterproof connectors 2 hr34b series push-on bayonet lock miniature waterproof connectors 3 number of contacts. (excluding ground contacts) contact type s : female, wire solder sc : female, crimp keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u product number structure hr34b - 12 wp a - 10 s - x ( * * * * ) 1 5 2 3 4 6 7 8 plugs series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wp : straight plug wlp : right-angle plug conduit material and applicable cable size a : conduit material metal, applicable cable (reference) : (?5.7~6.5) b : conduit material metal, applicable cable (reference) : (?6.5~7.3) d : conduit material plastic, a pplicable cable (reference) : (?5.7~6.5) e : conduit material plastic, applicable cable (reference) : (?6.5~7.3) k : conduit material metal, applicable cable (reference) : (?8.0~9.0) 1 5 6 7 8 2 3 4 number of contacts. (excluding ground contacts) contact type p : male,wire solder keying blank : standard x : x key position other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u hr34b - 12 wr a - 10 p - x ( * * * * ) 1 5 2 3 4 6 7 8 receptacles series name : hr34b series shell size : diameter(mm) of the mating interface of the plug shell style wr : receptacle shell type a : square flange for 10 positions b : square flange for 4 positions 1 5 6 7 8 2 3 4 conductor size : 20 to 25awg plating 1 : gold plated hr34b - sc1 - 2 1 1 1 2 4 3 5 crimp contacts series name : hr34b series contact style : sc1 : female contact contact type 1 : 100pcs/pack 2 : 10,000pcs/reel 1 4 5 2 3 b illustrations of mated connectors. 49 ?19 a straight plugs part no. hr34b-12wpd-10s hr34b-12wpe-10s hr34b-12wpd-4s hr34b-12wpd-4s-x hr34b-12wpe-4s hr34b-12wpe-4s-x hrs no. a 134-0026-0 00 134-0027-2 00 134-0020-3 00 134-0023-1 00 134-0025-7 00 134-0031-0 00 ?7.4 ?8.5 ?7.4 ?8.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10S(71) hr34b-12wpb-10s(71) hr34b-12wpk-10s hrs no. a 134-0004-7 71 134-0007-5 71 134-0052-0 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wpd-10sc hr34b-12wpe-10sc hrs no. a 134-0037-6 00 134-0038-9 00 ?7.4 ?8.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. HR34B-12WPA-10Sc hr34b-12wpb-10sc hr34b-12wpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a 134-0017-9 00 134-0028-5 00 134-0053-2 00 ?7.4 ?8.5 ?9.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) standard type (conduit material :plastic) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type(conduit material :metal) hr34b series push-on bayonet lock miniature waterproof connectors 4 b straight plug mating combinations 10 pos.plug + receptacle wire solder 4 pos.plug + receptacle wire solder b 50.1 49.6 hr34b series push-on bayonet lock miniature waterproof connectors 5 right angle plugs standard type (conduit material : plastic) 33.5 ?19 b a part no. hr34b-12wlpd-10s hr34b-12wlpe-10s hr34b-12wlpd-4s hr34b-12wlpd-4s-x hr34b-12wlpe-4s hr34b-12wlpe-4s-x hrs no. a b 134-0039-1 00 134-0040-0 00 134-0030-7 00 134-0034-8 00 134-0035-0 00 134-0036-3 00 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 ?1.7 (?5.7~6.5) (?6.5~7.3) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10s(71) hr34b-12wlpb-10s(71) hr34b-12wlpk-10s hrs no. a b 134-0005-0 71 134-0008-8 71 134-0054-5 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) solder cup inner diameter all dimensions : mm ?1 (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) part no. hr34b-12wlpd-10sc hr34b-12wlpe-10sc hrs no. a b 134-0041-3 00 134-0042-6 00 ?7.4 ?8.5 30.85 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) part no. hr34b-12wlpa-10sc hr34b-12wlpb-10sc hr34b-12wlpk-10sc not all cables of applicable dia. range can be easily assembled. please kindly check with factory before use. hrs no. a b 134-0018-1 00 134-0029-8 00 134-0055-8 00 ?7.4 ?8.5 ?9.5 30.5 31.5 applicable cable diameter range(reference) (?5.7~6.5) (?6.5~7.3) (?8.0~9.0) wire solder wire solder crimp (separate contacts required) crimp (separate contacts required) robust type (conduit material :metal) ?7.4 ?8.5 ?7.4 ?8.5 30.85 b illustrations of mated connectors. a 10 pos. plug shell a,b type. 10 pos. plug shell d,e type. 10 pos. plug shell k type. 4 pos. plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder plug + receptacle wire solder a 31.0 31.3 32.0 31.3 right-angle plug mating combinations receptacles wire solder 1 3 4 7 8 10 a a b b 4-?3.2 4-(r2.8) part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x o ring for water proof is not attached. please find appropriate one from the market. hrs no. a b 134-0016-6 00 134-0021-6 00 134-0024-4 00 solder cup inner diameter all dimensions : mm ?1 ?1.4 17.26 18.26 23.4 25.4 b crimp contacts female 15 1.2 part no. packaging hr34b-sc1-111 hr34b-sc1-211 100 pcs/pack 10,000 pcs/reel note : use wire with a jacket diameter of 1.7mm max. hrs no. 134-0051-7 00 134-0050-4 00 applicable conductor 20 to 25awg (stranded wire) hr34b series push-on bayonet lock miniature waterproof connectors 6 b recommended panel cutouts receptacle - wire solder ?e ?d c a a 4-b a b c d e part no. hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x recommended o ring dia. thickness ?1.5 ?1.5 inner diameter ?11.5 ?15.5 hr34b-12wra-10p hr34b-12wrb-4p hr34b-12wrb-4p-x 17.260.05 1 0/-0.1 12.5 +0.1/0 17 +0.1/0 18.260.05 1.1 0/-0.1 16.3 +0.1/0 20.8 +0.1/0 m30.5 all dimensions : mm b receptacle contact arrangement note.1 view direction : mating surface note.2 mark is ground terminal. 10 8 7 4 3 12 6 5 9 1 23 4 pos.wire solder 10 pos.wire solder hr34b series push-on bayonet lock miniature waterproof connectors 7 b connector mating combinations straight, wire solder (standard key position) hr34b-12wpd-4s hr34b-12wpe-4s wire solder (standard key position) hr34b-12wrb-4p wire solder (x key position) hr34b-12wrb-4p-x right angle, wire solder (standard key position) hr34b-12wlpd-4s hr34b-12wlpe-4s straight, wire solder (x key position) hr34b-12wpd-4s-x hr34b-12wpe-4s-x right angle, wire solder (x key position) hr34b-12wlpd-4s-x hr34b-12wlpe-4s-x 4 pos. plugs 4 pos. receptacles standard key position x key position x key position standard key position straight, wire solder or crimp HR34B-12WPA-10S(71),10sc hr34b-12wpb-10s(71),10sc hr34b-12wpd-10s,10sc hr34b-12wpe-10s,10sc hr34b-12wpk-10s,10sc right angle, wire solder or crimp hr34b-12wlpa-10s(71),10sc hr34b-12wlpb-10s(71),10sc hr34b-12wlpd-10s,10sc hr34b-12wlpe-10s,10sc hr34b-12wlpk-10s,10sc wire solder hr34b-12wra-10p 10 pos. plugs 10 pos. receptacles 8 hr34b series push-on bayonet lock miniature waterproof connectors b applicable tools description part no. hrs no. applicable contact applicable cable manual contact crimping tool press applicator contact extraction tool ht304/hr34b-1 cm-105c ap105-hr34b-1 rp6-sc-tp 150-0107-9 901-0001-0 901-2051-2 150-0039-0 hr34b-sc1-111 hr34b-sc1-211 hr34b-sc1-111 hr34b-sc1-211 20awg,23awg,25awg 20 to 25awg --------------- manual contact crimping tool press cm-105c (applicator ordered separate) contact extraction tool b handling b precautions 1. mating 2. un-mating holding the plug by the outer shell (a) align the arrow on the plug with the alignment mark on the receptacle and push straight in. rotate the sleeve (b) counter-clockwise to a full stop and un-mate the plug from the receptacle. plug mating position alignment marks receptacle a b rotate counter-clockwise 1. when disconnecting or inserting the connector, be sure to do so after turning off the power. 2. to insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diag ram below (i.e., the mating mark of the receptacle). 3. note that the display method of the mating mark will differ depending on the receptacle. 4. to maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diame ter. 5. please consult hirose electric sales for harness assembly procedure. center line of the connector 1 mm max. alignment mark when completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). if the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer draw ings prior to use. the contents of this catalog are current as of date of 01/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
|
